Battery Basics: LiFePO4 Cells

The main difference between single and multistage charge profiles for LiFePO4 batteries has to do with the chemistry of the battery. Unlike lead-acid batteries, once a LiFePO4 cell achieves its charge voltage, it is nearly fully charged. Since various cells within the pack can charge at different speeds, a short balancing time is needed at the end of the charge cycle in order to have each cell obtain its ideal charge voltage. Since the amount of imbalance can vary greatly, the optimal absorption/ balancing time also changes, but 6-30 minutes per charge cycle should suffice.
Chemistry Lithium Iron Phosphate
Nominal Voltage (per cell) 3.2V
Max Charge Voltage 3.65V
Charge Profile 2 Stage CC-CV* or Multistage


What voltage should I choose for my LiFePO4 cells?
(and what Sunforge recommends?)


There is a little debate in the community whether it is harmful to a LiFePO4 battery to be maintained at its max voltage (3.55V-3.65V per cell / 14.2V-14.6V for a 4S battery pack) indefinitely. One opinion is that it is better not to maintain the voltage indefinitely, rather use a multistage profile which would maintain a voltage which equates closely to (or below) the resting voltage of a fully charged battery (once a charge cycle has been completed), extending the life of the cells.
If an application is going to be cycling a cell regularly, then of course it will take time daily to recharge, resulting in the amount of time at the charge voltage not being the same as an application where a fully charged battery will be maintained indefinitely at its max CV. As such, the benefits of multistage vs 2-stage charging can also be relevant to your application.

Given the anticipated life cycle of lithium batteries, and their more or less recent emergence into applications such as we are seeing today, it might be several years before we know if 2-stage CC-CV* or multistage makes any appreciable difference.

Genasun pre-programmed controllers for LiFePO4 have a 2-stage CC-CV* charge profile and a per cell charge voltage of ~3.55V (14.2V for a 4S battery pack) in order to minimize stress on the cells without sacrificing significant State of Charge (SOC) and improving performance and longevity of the battery. For more info, read this article. 

However, on request, Genasun can also provide a multistage charge profile for LiFePO4 batteries.  For example, we have suggested the charge profile with the following voltages: Absorption 14.4V – Absorption time 0.5 hours – Float Voltage: 13.6V – Restart Voltage 13.2V. See the CC-CV* and multistage graphs below.


4S CC-CV* LiFePO4 example:



Constant Current Voltage increases
Constant Voltage 14.2V – 14.6V



4S Multistage LiFePO4 example:

Multi Stage LiFePO4


4S LiFePO4 Multistage LiFePO4
Absorption Voltage 14.2V – 14.6V
Constant Voltage 15-30 min.
Float Voltage 13.4V – 13.8V


Genasun charge controllers are off-the-shelf for 3S or 4S LiFePOand can be programmed in the factory CC-CV* or multistage charge profiles for any Li battery with the SKUs GV-5-Li-CV, GV-10-Li-CV, and GVB-8-Li-CV.

 Genasun models  CC-CV* 3S LiFePO4  CC-CV* 4S LiFePO4  Multistage or CC-CV LiFePO4
GV-5 GV-5-Li-10.7V GV-5-Li-14.2V GV-5-Li-CV
GV-10 GV-10-Li-CV GV-10-Li-14.2V GV-10-Li-CV
GVB-8 (Boost) GVB-8-Li-CV GVB-Li-14.2V GVB-8-Li-CV
GVB-8-WP (Boost) GVB-Li-14.2V-WP


Blue Sky Energy controllers SC30 and SB3000i can be programmed by the user for any type of charge profile by their onboard display. The SB1524iXSB2512iX-HV, and SB3024iL/SB3024DiL can be fully programmable when paired with an external accessory. For more info on how to program a Blue Sky Energy charge controller for a LiFePObattery with the IPN ProRemote, read this article.

Blue Sky Energy models CC-CV* or multistage LiFePO4
SC30 / SB3000i programmable via onboard display
SB1524iX / SB25iX-HV programmable (1)
SB3024iL / SB3024DiL programmable (1)(2)
(1) Nonvolatile memory programmable by users with the  IPN ProRemote, BT Connect, or UCM
(2) Limited programming via internal dip switches


As always, please drop us a line for details or any questions.


(*) CC: Constant Current allows the full current of the charger to flow into the battery until the power supply reaches its pre-set voltage. CV: Constant Voltage provides only enough current to maintain a pre-set voltage, reducing output as the battery becomes fully charged.